Polyacrylamide manufacturers talk about in the actual production and use process, no matter what type of polyacrylamide is used, we need to do the selection experiment first, because the selection of polyacrylamide is very important. A good choice not only works well, but also saves on the amount. Plus, a lower price might work better. The more models you have for selection, the more suitable models you will choose.
In addition to selection, but also pay attention to the stability of product quality. The quality stability of polyacrylamide manufactured by polyacrylamide manufacturers is also very important. In the production process, due to some factors, the product is prone to errors, so the stability of polyacrylamide in the production process is difficult to control, poor stability will affect the use of products. In many cases, these products also circulate to the market due to cost considerations. So if there is a link to the circulation of these products to the market for supervision and testing, basically can ensure the stability of quality. However, as an end customer, this capability is rarely available.
Polyacrylamide (PAM) is a linear polymer, chemical formula is (C3H5NO) N. It is a hard glassy solid at room temperature. The products are liquid glue, latex and white powder particles, translucent beads and flakes. Good thermal stability. Can be dissolved in water in any proportion, aqueous solution is uniform transparent liquid. After long-term storage, the solution viscosity will decrease due to slow degradation of polymer, especially when the storage conditions are poor.  Polyacrylamide, as lubricant, suspension agent, clay stabilizer, oil displacement agent, water loss reducer and thickener, has been widely used in drilling, acidification, fracturing, water plugging, cementing and secondary oil recovery, tertiary oil recovery. It is a very important oil field chemical.Learn more
Polyferric sulfate is a kind of inorganic polymer coagulant with superior performance. It is a light yellow amorphous powdery solid and easily soluble in water. 10% (mass) aqueous solution is red-brown transparent solution and hygroscopic. Polyferric sulfate is widely used in drinking water, industrial water, all kinds of industrial waste water, municipal sewage, sludge dewatering purification treatment.Learn more