Polyacrylamide (PAM) is a linear polymer, chemical formula is (C3H5NO) N. It is a hard glassy solid at room temperature. The products are liquid glue, latex and white powder particles, translucent beads and flakes. Good thermal stability. Can be dissolved in water in any proportion, aqueous solution is uniform transparent liquid. After long-term storage, the solution viscosity will decrease due to slow degradation of polymer, especially when the storage conditions are poor. [1] Polyacrylamide, as lubricant, suspension agent, clay stabilizer, oil displacement agent, water loss reducer and thickener, has been widely used in drilling, acidification, fracturing, water plugging, cementing and secondary oil recovery, tertiary oil recovery. It is a very important oil field chemical.
Cationic polyacrylamide
Product name |
Cationic polyacrylamide |
||||||
CAS |
9003-05-8 |
||||||
Appearance |
White granule powder |
||||||
Product model |
16012 |
16019 |
16029 |
16035 |
16044 |
16049 |
16065 |
Moleaular weight |
10--12 |
10--12 |
10--12 |
10--12 |
10--12 |
10--12 |
10--12 |
Ionization degree (%) |
10--15 |
18-22 |
28--32 |
38--42 |
48--52 |
58-62 |
68--72 |
Solid content (%) |
≥90 |
||||||
PH Value |
4--9 |
||||||
Dissolution Time (Min) |
≤90 |
||||||
Remaining monomer(%) |
≤0.1 |
Anionic polyacrylamide
Product name |
anionic polyacrylamide |
||||||
CAS |
9003-05-8 |
||||||
Appearance |
White granule powder |
||||||
Product model |
1805 |
1810 |
1815 |
1825 |
1835 |
1860 |
1880 |
Moleaular weight |
3--12 |
6--20 |
6--20 |
6--22 |
6--22 |
20--25 |
20--25 |
Ionization degree (%) |
0--5 |
8--10 |
10--15 |
20--25 |
25--30 |
30--35 |
30--35 |
Solid content (%) |
≥90 |
||||||
PH Value |
4-12 |
||||||
Dissolution Time (Min) |
≤90 |
||||||
Remaining monomer(%) |
≤0.1 |
Cationic polyacrylamide
CPAM16012 |
It is suitable for sludge dewatering in paper mill ,printing and dyeing factory ,coal mine and coking plant |
CPAM16019 |
It is Suitable for paper mill,pringting and dyeing factory ,coal mine ,cigarette factory ,power plant,textile factory ,plastic factory ,coking plant and other chemical enterprises. |
CPAM16029 |
It is Suitable for industrial sewage ,municipal sewage ,beverage juice sludge dewatering application. |
CPAM16035 |
It is suitable for sludgedewatering in river sludge treatment ,kitchen wastewater and municipal sewage,pharmaceutical factory ,amylase factory ,liquor factory ,food factory ,brewery,slaughterhouse,monosodium glutmate factory ,dairy product ,seafood factoryand beverage factory. |
CPAM16044 |
|
CPAM16049 |
|
CPAM16065 |
Anionic polyacrylamide
APAM1805 |
Used for flocculation and sedimentation in wastewater treatment of industrial ,municipal and production enterprises. |
APAM1810 |
|
APAM1815 |
|
APAM1825 |
|
APAM1835 |
|
APAM1860 |
Suitable for sanding washing,coal washing ,mineral processing these production is large,the on-site sewage concentration is high (35%-60%)and there is not enough reagent reaction distance and reaction time |
APAM1880 |