Polyacrylamide (PAM) is a linear polymer, chemical formula is (C3H5NO) N. It is a hard glassy solid at room temperature. The products are liquid glue, latex and white powder particles, translucent beads and flakes. Good thermal stability. Can be dissolved in water in any proportion, aqueous solution is uniform transparent liquid. After long-term storage, the solution viscosity will decrease due to slow degradation of polymer, especially when the storage conditions are poor.  Polyacrylamide, as lubricant, suspension agent, clay stabilizer, oil displacement agent, water loss reducer and thickener, has been widely used in drilling, acidification, fracturing, water plugging, cementing and secondary oil recovery, tertiary oil recovery. It is a very important oil field chemical.Learn more
Polyferric sulfate is a kind of inorganic polymer coagulant with superior performance. It is a light yellow amorphous powdery solid and easily soluble in water. 10% (mass) aqueous solution is red-brown transparent solution and hygroscopic. Polyferric sulfate is widely used in drinking water, industrial water, all kinds of industrial waste water, municipal sewage, sludge dewatering purification treatment.Learn more
Henan SECCO Environmental Protection Technology Co., Ltd. Founded in 2003, is located in Gongyi city Henan province, a nationial water purifier industry cluster mainly professional manufacture the production of polyacrylamide such as : anionic polyacrylamide, cationic polyacrylamide, non polyacrylamide and other polymer with a complete set of sewage flocculantion treatment solutions according to different usage scenarios.
The products are widely used in urban sewage, papermking, metallurgy, mineral processing, oil field, chemcial indstry textile printing and dyeing, pharmaceuticals, leather, food and other fields in Africa, eruope, southeast, asia, greatly improving the flocculation settlement, air flotation, concentration and depydration speed...
There are many kinds of cationic polyacrylamide, the choice of cationic polyacrylamide is a difficult problem for customers. The ionic degree of cationic polyacrylamide is divided into more than 20-60 models. Today, Xiaobian explains the difference between 20 ion degree and 60 ion degree in sewage treatment.
The use of cationic polyacrylamide: when used, the concentration should be controlled in. When the supporting dissolving equipment and dosing system are not used, the dissolving and dilution tank should be set up. The dosage should be adjusted according to the actual situation.
Anionic polyacrylamide is mainly used as flocculant: for coarse suspended particles, high concentration, positive charge, water PH value is neutral or alkaline sewage, anionic polyacrylamide molecular chain contains a certain amount of ji groups, can adsorb solid particles suspended in water, particles bridge the formation of large floc.
The products are widely used in urban sewage, papermking, metallurgy, mineral processing, oil field, chemcial indstry textile printing and dyeing, pharmaceuticals, leather, food and other fields in Africa, eruope, southeast, asia, greatly improving the flocculation settlement, air flotation, concentration and depydration speed, effectively imporve solid-liquid separation.get inquiry