Cationic polyacrylamide specially used in pig farm wastewater treatment.
Pig farm wastewater includes washing wastewater, fecal wastewater, urine and other fecal wastewater, which contains rich organic matter and the atmosphere, phosphorus, potassium and other elements required for crop growth and development.
Organic matter content is several times higher than ordinary wastewater. Cations are usually used in this case.
In the treatment of pig farm wastewater, the first thing to pay attention to is to filter out a large number of suspended solids contained in the wastewater through fences or screens, which can reduce the content of suspended solids and pollutants in the wastewater. The amount of medication can save costs. A fully dissolved polyaluminum chloride solution is then added to the sewage, followed by a cationic polyacrylamide solution. Here they fuse together, effectively removing suspended matter, some ammonia nitrogen and phosphorus from the water, while the chemical oxygen demand in the water is significantly reduced. In the follow-up treatment, the difficulty of treatment will be greatly reduced.
Cationic polyacrylamide is used for sludge dewatering. According to the properties of sludge, the corresponding product model can be selected. It can effectively dehydrate the sludge before it enters the press filtration. The dehydration process will produce a large frame, non-stick filter cloth, press filter is not dispersed, thick filter cake, high dehydration efficiency, filter cake moisture content below 80%.
Polyacrylamide (PAM) is a linear polymer, chemical formula is (C3H5NO) N. It is a hard glassy solid at room temperature. The products are liquid glue, latex and white powder particles, translucent beads and flakes. Good thermal stability. Can be dissolved in water in any proportion, aqueous solution is uniform transparent liquid. After long-term storage, the solution viscosity will decrease due to slow degradation of polymer, especially when the storage conditions are poor.  Polyacrylamide, as lubricant, suspension agent, clay stabilizer, oil displacement agent, water loss reducer and thickener, has been widely used in drilling, acidification, fracturing, water plugging, cementing and secondary oil recovery, tertiary oil recovery. It is a very important oil field chemical.Learn more
Polyferric sulfate is a kind of inorganic polymer coagulant with superior performance. It is a light yellow amorphous powdery solid and easily soluble in water. 10% (mass) aqueous solution is red-brown transparent solution and hygroscopic. Polyferric sulfate is widely used in drinking water, industrial water, all kinds of industrial waste water, municipal sewage, sludge dewatering purification treatment.Learn more