High purity polyacrylamide is a kind of polymer compound with excellent adsorption and thickening properties, so it has been widely used in the field of water treatment. The following introduces the application of high purity polyacrylamide in water treatment.
First, high purity polyacrylamide can be used as flocculant in sewage treatment. The addition of high purity polyacrylamide in sewage can make the small particles suspended in water quickly condense into large particles, so as to facilitate the subsequent precipitation and filtration treatment. In addition, high purity polyacrylamide can also react with organic materials in sewage, converting them into inorganic substances that are easy to treat.
Secondly, high purity polyacrylamide can also be used as an adsorbent in water purification. Because of its excellent water absorption and dispersibility, high purity polyacrylamide can be used as adsorbent to remove heavy metal ions and organic pollutants from water. High purity polyacrylamide adsorbent has the advantages of low cost and easy operation, so it has been widely used in the field of water purification.
In addition to the above applications, high purity polyacrylamide can also be used as an additive in water treatment. For example, adding high purity polyacrylamide to the water treatment process can improve water mobility and reduce water viscosity, thus improving water treatment efficiency.
In general, the application of high purity polyacrylamide in water treatment is very wide, with good purification effect and treatment efficiency. With the increasing attention to water resources and the enhancement of environmental protection awareness, it is believed that the application prospect of high purity polyacrylamide in water treatment will be more broad.
Polyacrylamide (PAM) is a linear polymer, chemical formula is (C3H5NO) N. It is a hard glassy solid at room temperature. The products are liquid glue, latex and white powder particles, translucent beads and flakes. Good thermal stability. Can be dissolved in water in any proportion, aqueous solution is uniform transparent liquid. After long-term storage, the solution viscosity will decrease due to slow degradation of polymer, especially when the storage conditions are poor.  Polyacrylamide, as lubricant, suspension agent, clay stabilizer, oil displacement agent, water loss reducer and thickener, has been widely used in drilling, acidification, fracturing, water plugging, cementing and secondary oil recovery, tertiary oil recovery. It is a very important oil field chemical.Learn more
Polyferric sulfate is a kind of inorganic polymer coagulant with superior performance. It is a light yellow amorphous powdery solid and easily soluble in water. 10% (mass) aqueous solution is red-brown transparent solution and hygroscopic. Polyferric sulfate is widely used in drinking water, industrial water, all kinds of industrial waste water, municipal sewage, sludge dewatering purification treatment.Learn more