In addition, papermaking, mineral processing, coal washing, textile, metallurgy, cement enhancers, high water absorption agents, adhesives, leather retanning agents and other industries demand will also grow steadily. It is expected that the demand of cationic polyacrylamide in 2010 will exceed 40%, will drive scientific research institutions and production enterprises to develop and produce cationic polyacrylamide. It is expected that cationic polyacrylamide products will enter the golden development period in the next few years. Therefore, accelerating the settlement of particles in the suspension, accelerating the clarification of the solution and promoting filtration has a very obvious role. Anions, cations and ions. Among them, cationic polyacrylamide is an effective flocculant for sewage treatment. Therefore, it is of great significance to produce high molecular weight cationic polyacrylamide and apply it in some fields. Polyacrylamide can be divided into non-ionic type according to ionic properties. The project will produce a range of high molecular weight and molecular weight cationic and anionic polyacrylamide emulsion products. Cationic polyacrylamide main flocculation with negative charge colloid, with turbidity removal, decolorization, adsorption, adhesion, suitable for printing and dyeing, paper, food, construction, metallurgy, mineral processing, coal powder, oil fields, aquatic products processing and other industries, fermentation. It is suitable for the dewatering treatment of municipal sewage, municipal sludge, papermaking sludge and other industrial sludge.
Polyacrylamide (PAM) is a linear polymer, chemical formula is (C3H5NO) N. It is a hard glassy solid at room temperature. The products are liquid glue, latex and white powder particles, translucent beads and flakes. Good thermal stability. Can be dissolved in water in any proportion, aqueous solution is uniform transparent liquid. After long-term storage, the solution viscosity will decrease due to slow degradation of polymer, especially when the storage conditions are poor.  Polyacrylamide, as lubricant, suspension agent, clay stabilizer, oil displacement agent, water loss reducer and thickener, has been widely used in drilling, acidification, fracturing, water plugging, cementing and secondary oil recovery, tertiary oil recovery. It is a very important oil field chemical.Learn more
Polyferric sulfate is a kind of inorganic polymer coagulant with superior performance. It is a light yellow amorphous powdery solid and easily soluble in water. 10% (mass) aqueous solution is red-brown transparent solution and hygroscopic. Polyferric sulfate is widely used in drinking water, industrial water, all kinds of industrial waste water, municipal sewage, sludge dewatering purification treatment.Learn more