Anionic polyacrylamide is an important polymer, which has a wide range of applications and chemical properties. It is obtained by introducing negatively charged groups into polyacrylamide.
Anionic polyacrylamide is widely used in water treatment because of its excellent flocculation and sedimentation properties. It can be adsorbed and coagulated with the particles in the water to form large floc, so as to precipitate the suspended matter quickly and improve the clarity of the water. In sewage treatment, drinking water purification and industrial wastewater treatment, anionic polyacrylamide can effectively remove pollutants such as suspended matter, chroma and oil, so that the water quality has been significantly improved.
In addition, anionic polyacrylamide also plays an important role in oil extraction, mineral flotation, textile printing and dyeing, paper and other industrial fields. In oil exploitation, it can be used as oil displacement agent to improve oil recovery. In mineral flotation process, anionic polyacrylamide can be used as flocculant and dispersant to improve ore beneficiation effect. In the textile printing and paper industry, it can increase the adhesion and stability of fiber, improve the quality of products and production efficiency.
However, environmental concerns should be noted when using anionic polyacrylamide. Due to its toxicity and bioaccumulation, it is necessary to reasonably control the dosage and discharge to reduce the potential impact on the environment. In addition, the preparation and treatment of anionic polyacrylamide need to comply with the relevant operational codes to ensure the health of the staff.
In conclusion, anionic polyacrylamide, as an important polymer, has a wide range of applications in water treatment and industry. Through rational use and management, it can give full play to its excellent flocculation performance and provide effective technical support for environmental protection and resource utilization.
Polyacrylamide (PAM) is a linear polymer, chemical formula is (C3H5NO) N. It is a hard glassy solid at room temperature. The products are liquid glue, latex and white powder particles, translucent beads and flakes. Good thermal stability. Can be dissolved in water in any proportion, aqueous solution is uniform transparent liquid. After long-term storage, the solution viscosity will decrease due to slow degradation of polymer, especially when the storage conditions are poor.  Polyacrylamide, as lubricant, suspension agent, clay stabilizer, oil displacement agent, water loss reducer and thickener, has been widely used in drilling, acidification, fracturing, water plugging, cementing and secondary oil recovery, tertiary oil recovery. It is a very important oil field chemical.Learn more
Polyferric sulfate is a kind of inorganic polymer coagulant with superior performance. It is a light yellow amorphous powdery solid and easily soluble in water. 10% (mass) aqueous solution is red-brown transparent solution and hygroscopic. Polyferric sulfate is widely used in drinking water, industrial water, all kinds of industrial waste water, municipal sewage, sludge dewatering purification treatment.Learn more