PAM polymer flocculant is a kind of multifunctional polymer compound, which can be used in water treatment, sludge treatment and soil improvement. The following is a detailed introduction of its application, use and precautions.
Water treatment: PAM polymer flocculant can be used to precipitate suspended matter, reduce turbidity, remove heavy metal ions and organic materials. It is widely used in municipal tap water, industrial wastewater, agricultural irrigation water and other fields.
Sludge treatment: PAM polymer flocculant can make sludge dewatering efficiency, reduce water content. At the same time, in the process of compression, it can also play a lubricating role to prevent adhesion.
Soil improvement: PAM polymer flocculants can improve soil structure, increase soil permeability and moisture retention. This is very important for agricultural production and land restoration.
How to use:
Dissolve: Add PAM polymer flocculant to water, and stir fully until completely dissolved.
Adding: The dissolved PAM polymer flocculant evenly added to the treated water, sludge or soil, and fully stirred.
Concentration: The concentration added should be determined according to the actual situation, generally speaking, 0.1-0.5%.
Before use, read the product manual carefully and strictly follow the instructions.
PAM polymer flocculant should be stored in a dry, ventilated, light away environment, avoid moisture and sun.
Wear gloves, masks and other necessary protective equipment when using, avoid contact with skin, mouth and eyes.
After adding, the equipment and container should be cleaned in time to avoid residue and pollution.
PAM polymer flocculant is a kind of multifunctional polymer compound, which is widely used in water treatment, sludge treatment and soil improvement. During use, it is necessary to pay attention to safe operation and correct storage to ensure its effectiveness and security.
Polyacrylamide (PAM) is a linear polymer, chemical formula is (C3H5NO) N. It is a hard glassy solid at room temperature. The products are liquid glue, latex and white powder particles, translucent beads and flakes. Good thermal stability. Can be dissolved in water in any proportion, aqueous solution is uniform transparent liquid. After long-term storage, the solution viscosity will decrease due to slow degradation of polymer, especially when the storage conditions are poor.  Polyacrylamide, as lubricant, suspension agent, clay stabilizer, oil displacement agent, water loss reducer and thickener, has been widely used in drilling, acidification, fracturing, water plugging, cementing and secondary oil recovery, tertiary oil recovery. It is a very important oil field chemical.Learn more
Polyferric sulfate is a kind of inorganic polymer coagulant with superior performance. It is a light yellow amorphous powdery solid and easily soluble in water. 10% (mass) aqueous solution is red-brown transparent solution and hygroscopic. Polyferric sulfate is widely used in drinking water, industrial water, all kinds of industrial waste water, municipal sewage, sludge dewatering purification treatment.Learn more